ADE Zantitium RD3-015 Pro large Red Dot Sight w/ Multi-Reticle for Picatinny/Docter

ADE Zantitium RD3-015 Pro motion-activated large red dot sight with multi-reticle system, for Docter Footprint or Picatinny.

This red dot optic is particularly suitable for AR, AK, shotgun or other long guns.

In 2023, ADE released the 2023 PRO series red dot called the Zantitium PRO (RD3-015PRO). Additional features of the PRO series include the motion-activated system, IP67 waterproofing and multi-reticle technology.

The ADE Zantitium PRO (D3-015PRO) has a motion-activated system. While the Zantitium PRO is switched on, the red dot illumination goes into sleep mode after five minutes of inactivity. However, if motion or vibration is detected, it will immediately turn the lighting on at the previous brightness setting. The user also has the option to manually turn off the Red Dot to deactivate the motion-activated system.

The ADE Zantitium PRO has a multi-reticle system. The reticle can be switched between a 32-MOA circle with a 2-MOA dot, a 2-MOA dot only or a 32-MOA ring only at the touch of a button. Even better, the same LED projects both reticles, so no re-zeroing is required. Operates on a single battery. Press and hold the DOWN button for 3 seconds to manually turn power on/off. Press and hold the UP button for 3 seconds to change the reticle. Briefly press the UP/DOWN buttons to adjust the brightness.

The ADE Zantitium illuminated dot sight is the largest handgun sight on the market! The dimensions are LxWxH: 5.7 x 3.5 x 3.2 cm (2.25 x 1.4 x 1.27 inches). The window is up to twice the size of other micro red dots.

Handgun use:

The size of the red dot is about 30% longer than other red dots, the window is also larger. Therefore, it will NOT fit some Optics Ready handgun models that have an optical cutout in front of the rear sight (the rear sight remains so that the red dot is witnessed), such as Glock Mos, Springfield OSP. The longer length of this red dot does not fit in the cutout. It will only fit on the mounting plate provided for REPLACING the rear sight and attached to the top of the slide (not in the pre-cut), or through the Picatinny mount included with this product.

The scope of delivery includes the Red Dot optic, tool, removable Picatinny plate with two screws, cover, lens cloth and operating instructions. Fits the pistol optic plate as a replacement for the rear sight (DOES NOT FIT OPTICS-READY PISTOLS WITH CUTOUT) compatible with Doctor/Vortex Venom/Burris Fastfire footprints. Does NOT fit RMR, Shield RMS type footprint plates.

Includes a removable Picatinny rail adapter.

An optics plate for a specific weapon is not included in the scope of delivery.